Ducati Multistrada V4 · repair cost
How much does it cost to replace tires on a Ducati Multistrada V4?
Budget $475 all-in at an independent workshop, up to $745 at a dealer with premium parts, or $380 in parts and consumables if you do the 1 h job yourself. Figures are US reference prices updated 2026-08-01.
Cost breakdown
Front and rear tire replacement on a adventure-class bike, 1 h flat-rate labour.
| Route | Parts | Labour | Total |
|---|---|---|---|
| DIY | $380 | 90 min of your time | $380 |
| Independent shop | $380 | $95 | $475 |
| Dealer, premium parts | $605 | $140 | $745 |
Parts range $230–$575 plus $30 of consumables. Labour uses 95 USD/h independent and 140 USD/h dealer rates.
Job facts
| Job | Front and rear tire replacement |
|---|---|
| Bike | Ducati Multistrada V4 (Adventure) |
| Flat-rate labour | 1 h |
| DIY time | 90 min · Advanced |
| Typical interval | Rear every 8,000-15,000 km, front roughly double, and always within 5 years of the date code |
| Data updated | 2026-08-01 |
Signs it is due
- Tread under 1.6mm or wear bars flush with the surface
- Squared-off centre profile making turn-in vague
- Sidewall cracking or a DOT date code over five years old
- Cupping or scalloping across the front tread
Tools you need
- Front and rear paddock stands
- Axle sockets and a torque wrench
- Tire levers, rim protectors and a bead breaker (or a shop for the mount)
- Static or dynamic wheel balancer and weights
Torque figures for this job
General ranges for these fastener classes. Confirm the exact figure in the service manual for your model and year before final tightening.
| Fastener | Range | Note |
|---|---|---|
| Front axle bolt or nut | 55–90 Nm | Torque the axle before the fork-leg pinch bolts so the fork can align itself. |
| Front axle pinch bolts | 20–25 Nm | Bounce the front suspension a few times before final tightening. |
| Rear axle nut | 85–110 Nm | Check chain slack again after the axle is torqued. |
| Valve stem cap and core | Hand tight | Never use a tool on the core beyond the valve tool's own stop. |
Full chart by thread size: motorcycle torque reference.
How to replace tires
1. Remove the wheels
Support the bike on stands, remove the calipers where needed and drop both wheels out.
2. Break the beads
Deflate, remove the valve core and break both beads before levering the old tire off with rim protectors in place.
3. Fit the new tire
Match the rotation arrow, lubricate the beads and lever the tire on without pinching, then seat the beads to the pressure on the sidewall.
4. Balance the wheel
Balance with stick-on weights until the wheel holds any position on the balancer.
5. Refit and torque
Refit wheels and calipers, torque the axles to spec and pump the brake lever until firm.
6. Scrub in
Ride gently for the first 150 km to scrub off the release agent before using the shoulders.
Same job, other markets
Other jobs on the Ducati Multistrada V4
Get the parts
FAQ
How much does a Ducati Multistrada V4 tires job cost?
Around $475 at an independent workshop including parts, and up to $745 at a dealer with premium parts. Doing it yourself costs $380 in parts and consumables plus about 90 minutes.
Can I replace only the rear tire?
Yes, and most riders do because the rear wears faster. Keep the pair within the same range so front and rear profiles still agree.
Is fitting my own tires worth it?
Only with a bead breaker and a balancer. Most riders save more by removing the wheels themselves and paying only the fit-and-balance fee.
Can I mix tire brands front and rear?
It works but is not recommended. Profiles differ between makers and mixing them can make the bike run wide or fall into corners.