Verified fitBrakesvia MotorcycleID
Honda Sintered Brake Pad Set
Sintered front and rear pads for strong bite and long life in all weather.
$42.50View
Honda · Brakes
Honda brake parts
Sintered and organic pads, floating discs and braided lines. Pads and fluid are the two cheapest upgrades that change lever feel more than anything else on a motorcycle. On Honda models, always confirm the part against the exact model year before ordering.
Pick your Honda model
CBR600RR brake parts
Sport · 2003–2026
CBR1000RR brake parts
Sport · 2004–2026
CB500F brake parts
Naked · 2013–2026
CB650R brake parts
Naked · 2019–2026
Africa Twin CRF1100L brake parts
Adventure · 2016–2026
Rebel 500 brake parts
Cruiser · 2017–2026
Gold Wing brake parts
Touring · 2001–2026
CRF450R brake parts
Dirt · 2002–2026
Grom brake parts
Mini · 2014–2026
PCX 150 brake parts
Scooter · 2012–2026
Fitment reference
| Pad compound | Sintered for all-weather bite, organic for quiet low-dust |
|---|---|
| Fluid spec | DOT 4 (DOT 5.1 where specified) — never DOT 5 silicone |
| Disc minimum | Typically 4.0-4.5mm front, stamped on the carrier |
| Brand | Honda (Japan) |
| Models covered | 10 |
| Install time | 45 min · Easy |
Honda brake parts available now
Before you buy
- Measure disc thickness against the minimum stamped on the disc carrier
- Replace pads in axle pairs, never one side only
- Flush DOT 4 fluid every two years regardless of mileage
- Clean and grease the caliper slider pins on the same job