Fitment reference
Ducati Scrambler Icon fitment & service data
A scrambler built 2015–2026. Use this page to confirm which parts are shared across the run and which change with the model year before you order.
Model data
| Manufacturer | Ducati (Italy) |
|---|---|
| Model | Scrambler Icon |
| Type | Scrambler |
| Production run | 2015–2026 |
| Model years in database | 12 |
| Latest model year | 2026 |
Category-by-category specs
Generic specs that hold across this model run. Always confirm part numbers against your VIN.
Exhaust
Slip-on mufflers and full systems in stainless, titanium and carbon. A slip-on typically saves 2-4 kg and changes the note; a full system is where real power gains and fuelling changes live.
| Fitment type | Slip-on (bolt to stock mid-pipe) or full system |
|---|---|
| Materials | Stainless, titanium, carbon-wrapped |
| Weight saving | 2-4 kg slip-on, up to 8 kg full system |
| Install | 60 min · Moderate |
Brakes
Sintered and organic pads, floating discs and braided lines. Pads and fluid are the two cheapest upgrades that change lever feel more than anything else on a motorcycle.
| Pad compound | Sintered for all-weather bite, organic for quiet low-dust |
|---|---|
| Fluid spec | DOT 4 (DOT 5.1 where specified) — never DOT 5 silicone |
| Disc minimum | Typically 4.0-4.5mm front, stamped on the carrier |
| Install | 45 min · Easy |
Lighting
LED headlight assemblies, sequential indicators and auxiliary driving lights. LED conversions cut current draw sharply, which is why indicator swaps usually need resistors or an LED flasher relay.
| Voltage | 12V DC, regulated |
|---|---|
| Indicator load | LED needs 21W resistors or an LED flasher relay |
| Approval | E-mark / DOT for road use |
| Install | 60 min · Moderate |
Controls & Levers
Adjustable brake and clutch levers, grips, bar ends and handlebar hardware. Lever reach adjustment is a safety item for smaller hands, not a styling choice.
| Bar diameter | 22mm (7/8in) or 28.6mm (1 1/8in) fat bar |
|---|---|
| Adjustment | Typically 6-position reach |
| Material | Billet 6061 aluminium |
| Install | 25 min · Easy |
Crash Protection
Frame sliders, engine guards, axle sliders and bar ends. Fitting sliders costs far less than a single fairing panel and typically pays for itself in the first low-speed drop.
| Mounting | Engine mount bolt, frame-specific brackets |
|---|---|
| Slider material | Delrin / POM head on steel mount |
| Typical coverage | Frame, axles, bar ends, engine case |
| Install | 60 min · Moderate |
Tires & Wheels
Sport, sport-touring and adventure rubber plus valves, rim tape and balance weights. Tires are the single largest handling variable on any motorcycle and the one riders leave longest.
| Sizing | e.g. 120/70 ZR17 front, 180/55 ZR17 rear |
|---|---|
| Pressure | Cold, per the swingarm or chain-guard sticker |
| Service life | 5 years from the DOT date code, regardless of tread |
| Install | 60 min · Advanced |
Parts that are year-specific on this bike
- Bodywork and fairing panels — moulded per generation, never cross-generation
- Seat pans and cowls — latch positions change with refreshes
- Wiring, ECU and lighting connectors — often revised mid-run
- Brake master cylinders and lever fitment — check the assembly, not the model name
Torque reference for common jobs
General ranges by thread size for the fasteners on this bike. Confirm the exact figure in the service manual for your model year before final tightening.
| Thread | Tool | Steel | Alloy | Where you meet it |
|---|---|---|---|---|
| M5 | 4 mm hex / 8 mm | 5–7 Nm | 4–5 Nm | Fairing bosses, instrument brackets, small covers |
| M6 | 5 mm hex / 10 mm | 9–12 Nm | 7–10 Nm | Engine covers, sprocket cover, heat shields, light brackets |
| M8 | 6 mm hex / 12–13 mm | 22–26 Nm | 18–22 Nm | Caliper mounts, disc bolts, footpeg hangers, exhaust hangers |
| M10 | 8 mm hex / 14–17 mm | 40–50 Nm | 32–40 Nm | Fork clamp bolts, rear sprocket nuts, shock mounts, engine mounts |
| M12 | 10 mm hex / 19 mm | 75–90 Nm | 60–72 Nm | Front axle, front sprocket nut, swingarm pivot bolts |
| M14 | 22 mm | 115–135 Nm | 95–110 Nm | Rear axle nut on mid-size bikes, some swingarm pivots |
| M16 | 24 mm | 170–200 Nm | 140–165 Nm | Rear axle nut on large bikes, steering-stem nut on some models |
Per-job figures and the full chart: motorcycle torque reference.
Getting the torque right
- Torque figures assume clean, dry, undamaged threads. Oil on a thread can raise the real clamping load by 20% or more at the same wrench reading.
- Where the manual calls for thread-lock, the figure is a wet figure — apply the locker, then torque immediately before it cures.
- Tighten in two passes: to roughly 70% of the figure across all fasteners, then to the full figure in the same order.
- Replace, never reuse, any fastener specified as stretch-to-yield, and always fit a fresh crush washer on a drain plug.
What each job costs on the Ducati Scrambler Icon
Brake pad replacement
0.8 h shop labour · Easy DIY
Chain and sprocket kit replacement
1.5 h shop labour · Moderate DIY
Front and rear tire replacement
1 h shop labour · Advanced DIY
Oil and filter service
0.7 h shop labour · Easy DIY
Fork seal and oil replacement
2.5 h shop labour · Advanced DIY
Slip-on exhaust fitting
1 h shop labour · Moderate DIY
Battery replacement
0.5 h shop labour · Easy DIY
Fairing panel replacement
3 h shop labour · Moderate DIY
Shop parts for the Ducati Scrambler Icon
Fairings & Bodywork
For the Scrambler Icon
Windscreens
For the Scrambler Icon
Exhaust
For the Scrambler Icon
Brakes
For the Scrambler Icon
Tires & Wheels
For the Scrambler Icon
Chain & Sprockets
For the Scrambler Icon
Engine & Filters
For the Scrambler Icon
Lighting
For the Scrambler Icon
Suspension
For the Scrambler Icon
By model year
2026 Scrambler Icon
Everything that fits
2025 Scrambler Icon
Everything that fits
2024 Scrambler Icon
Everything that fits
2023 Scrambler Icon
Everything that fits
2022 Scrambler Icon
Everything that fits
2021 Scrambler Icon
Everything that fits
2020 Scrambler Icon
Everything that fits
2019 Scrambler Icon
Everything that fits
2018 Scrambler Icon
Everything that fits
2017 Scrambler Icon
Everything that fits
2016 Scrambler Icon
Everything that fits
2015 Scrambler Icon
Everything that fits